Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the right front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Support the engine assembly with a suitable jack.
- Remove the nut securing the engine mount to the engine mount bracket.
- Lower the jack allowing the engine to lower slightly.
- Remove the nut (4) and bolt (1) securing the right engine mount to the frame rail.
- Remove the two nuts (3) securing the right engine mount to the frame rail.
- Remove the right engine mount (2).
Installation Procedure
- Position the right engine mount (2) to the frame rail.
- Install the right engine mount attaching bolt (1) and nut (4) to the frame rail.
- Install the two nuts (3) securing the right engine mount to the rail.
- Raise the engine into position.
- Install the nut securing the right engine mount to the right engine mount bracket.
- Remove the engine support jack.
- Install the right front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Lower the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the right engine mount to body rail nuts (3,4) to 70 N·m (52 lb ft).
Tighten
Tighten the right engine mount nut to 80 N·m (59 lb ft).
