Info - PASS-Key III EXPORT Mode Enable Procedure for GM of Canada

The 2001 Aurora has the Vehicle Theft Deterrent (VTD) module programmed with the EXPORT mode enabled and the PASS-Key® III AUTO-LEARN disabled.

If replacement of the VTD module is required, it must be reprogrammed to ensure the EXPORT mode is enable. To reprogram the VTD module, use a scan tool to perform the following procedure:

Important: The Tech 2 scan tool software version 20.003 or later (North American Operations) required for reprogramming the VTD Module is available from Techline on the TIS 6 Data CD and later.

1. Select F0 -- DIAGNOSTICS.
2. Enter the appropriate vehicle information (model year, vehicle type, service category).
3. Select F1 -- BODY.
4. Enter the appropriate vehicle information (carline, carline series).
5. Select -- VTD.
6. Select F2 -- SPECIAL FUNCTIONS.
7. Select F2 --SET OPTIONS.
8. Select F0 -- EXPORT OPTION.
9. Select -- DONE.
10. Press ENTER to place an asterisk next to EXPORT OPTION.
11. Select -- SAVE OPTIONS.

For vehicles repaired under warranty, use:

*This time is a unique labor time to be used only with this bulletin.

It will not be published in the Labor Time Guide Book.