GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 633864  Size: SH
  1. Place forefinger under the lower rear edge of the switch plate.
  2. Place thumb at the upper rear end of the switch plate along the curved surface.
  3. While pulling rearward with forefinger and holding pressure with thumb, flex and lift the rear of the switch plate upwards.
  4. Insert a small flat bladed tool under the forward edge of the switch plate.
  5. Gently pry the forward edge of the switch plate upwards.
  6. Lift the entire switch plate upwards to remove.
  7. Disconnect the electrical connector.

Installation Procedure


    Object Number: 442175  Size: SH
  1. Install the electrical connectors.
  2. Slide the rear edge of the switch plate down into the slot in the door trim panel.
  3. Snap the forward end of the switch plate down into the door trim panel.