The front inside door handle bezel has electrical connectors, the rear does not.

1. Insert a flat bladed tool behind the forward edge of the door handle bezel.
2. Gently pry the bezel away from the door trim panel.
3. Pull the bezel forward over the inside door handle.
4. Using a small flat blade tool, gently pry the memory seat switch out of the Handle bezel.
5. Disconnect the electrical connector from the power door lock switch.

1. Connect the electrical connectors, if any, to the inside door handle bezel.
2. Install the memory seat switch into the door handle bezel.
3. Slide the inside door handle through the opening in the door handle bezel.
4. Insert the tabs on the rear of the bezel behind the door trim panel.
5. Snap the front of the door handle bezel into place.