GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Aurora 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Turn Signal Cancel Cam and Upper Bearing Inner Race - Assemble - Off Vehicle

Tools Required

    • J 23653-SIR Steering Column Lock Plate Compressor
    • J 42137 Steering Column Lock Plate Compressor Adapter

    Object Number: 420188 Size: SH
  1. Install the inner race (4).
  2. Install the upper bearing inner race seat (3).
  3. Install the upper bearing spring (2).
  4. Lubricate the turn signal cancel cam assembly (1).

    5. Important: The electrical contact of the turn signal and multifunction switch assembly must rest on the turn signal cancel cam assembly.

  5. Install the turn signal cancel cam assembly (1).

    6. Object Number: 420191 Size: SH
  6. Install the shaft lock shield assembly.

    7. Object Number: 330127 Size: SH
  7. Install the new bearing retainer (1) using J 23653-SIR and J 42137 .

    8. Caution: Improper routing of the wire harness assembly may damage the inflatable restraint steering wheel module coil. This may result in a malfunction of the coil, which may cause personal injury.

  8. Install the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Assemble - Off Vehicle .
  9. Enable the inflatable restraint steering wheel module. Refer to Enabling the SIR System in SIR.