GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2004 🢒 Alero 🢒 Engine 🢒 Engine Electrical 🢒 Front Fender Liner Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.

    3. Object Number: 330141 Size: SH
  3. Remove the bolts from the front fender liner at the front bumper fascia.
  4. Remove the push-in retainers from the fender liner at the front bumper fascia.

    5. Object Number: 276965 Size: SH
  5. Remove the screws (2) from the fender liner to the fender.
  6. Remove the front fender liner (3) from the fender.

Installation Procedure

    Object Number: 276965 Size: SH
  1. Position the fender liner (3) to the front fender.
  2. Install the push-in retainers (4).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the fender liner to the fender.

    4. Tighten
    Tighten the fender liner screws to 2 N·m (18 lb in).


    Object Number: 330141 Size: SH
  4. Install the bolts to the front fender liner to the front bumper fascia.

    5. Tighten
    Tighten the fender liner bolts to 2 N·m (18 lb in).

  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  6. Lower the vehicle.