CREAK CONDITION, FRT. SEATS INSTALL NEW DERLIN PIVOT BUSH.

SUBJECT: BUCKET FRONT SEAT CREAK CONDITION LOCATED AT INNER PIVOT BUSHING -REPLACE NEW DELRIN PIVOT BUSHING

MODELS/YEARS: 1992 ACHIEVA W/AR9 SEAT OPTION

CONDITION:

---------- While making a sharp right or left turn, some 1992 Achievas with AR9 bucket seats may exhibit a noisy creaking condition in the driver and front passenger seats (when occupied).

CAUSE:

------ Friction between the inner front seat back pivot pin and the nylon pivot bushing in the front seat cushion housing.

CORRECTION:

----------- Using the service procedure found in the 1992 Achieva Service Manual Section 10-10 pages 5-7, replace the nylon pivot bushing with a Delrin pivot bushing. The Delrin bushing P/N 16727273 is currently available from GMSPO.

WARRANTY INFORMATION:

See the current Labor Time Guide.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.