GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Insulator Replacement

Removal Procedure

    Important:  When a suitable hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

  1. Install a suitable hood brace to the vehicle.

    2. Object Number: 1936896 Size: SH
  2. Remove the hood insulator to hood push-in retainers (1).

    3. Discard the retainers.

  3. Remove the hood insulator (2) from the hood.

Installation Procedure

    Object Number: 1936896 Size: SH
  1. Position the hood insulator (2) to the hood.

    2. Important: Always use NEW push-in retainers.

  2. Install the hood insulator to hood push-in retainers (1).
  3. Remove the suitable hood brace from the vehicle.