Tail Lamp Mount Panel Replacement CSV SWBHSV VXR8

1. Remove the tail lamp. Refer to Tail Lamp Replacement.



2. Remove the rear quarter end cap retaining nuts (1).



3. Remove the rear quarter end cap (1) by sliding upwards to disengage locating pins (2).

1. Install the rear quarter end cap (1) by engaging the locating pins (2) into the rear bumper fascia.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the rear quarter end cap retaining nuts (1).

Tighten
Tighten the nuts to 3 Nm (26.5 lb. in).

3. Install the tail lamp. Refer to Tail Lamp Replacement.