GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Water Outlet Installation

    Object Number: 1957905 Size: SH

    Important: Ensure a new rubber O-ring and seal is used when installing the water outlet housing.

  1. Install the coolant outlet housing (2) to the intake manifold.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the coolant outlet housing to intake manifold retaining bolts (1).

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).