GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Crankshaft Balancer Cleaning and Inspection

Cleaning Procedure
  1. Clean the crankshaft balancer in solvent that is compatible with the rubber.

    2. Caution: Refer to Safety Glasses Caution in the Preface section.

  2. Dry the crankshaft balancer with compressed air.

Inspection Procedure

    Object Number: 1959016 Size: SH
  1. Inspect the crankshaft balancer for the following:
    2. • Worn or damaged hub-to-crankshaft surface (1)
    • Worn, grooved or damaged hub seal surface (2).
    • Worn, chunking or deteriorated rubber between the hub and pulley (3)
    • Damaged drive belt ribs (4)
    • Damaged threaded holes (5)
  2. Repair or replace the crankshaft balancer as required.