GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 WM Sedan 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Crankshaft Balancer Removal

Tools Required

    • EN 46106 Flywheel Holding Tool
    • 303-642 Harmonic Balancer Puller

    Object Number: 1958097 Size: SH
  1. Install the EN 46106  (1) through the starter mounting hole.

    2. Object Number: 1958095 Size: SH
  2. Remove the crankshaft balancer to crankshaft retaining bolt (1).

    3. Object Number: 1961763 Size: SH
  3. Install the 303-642  (1).

    4. Important: Remove the crankshaft balancer off by tightening the center bolt on the 303-642  (1) until the crankshaft balancer (2) is removed from the crankshaft.

  4. Remove the crankshaft balancer (2).
  5. Remove the 303-642  (1) from the crankshaft balancer.