Step | Action | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Schematic References: Starting and Charging Schematics Connector End View References: Component Connector End Views | |||||||||||
1 | Did you review the following description and operations and perform the necessary inspections? | Go to Step 2 | |||||||||
2 | Turn the ignition to the START position. Did the starter solenoid click? | Go to Step 3 | |||||||||
3 | Inspect the engine and belt drive system for mechanical binding--seized engine, seized generator. Does the engine move freely? | Go to Step 4 |
| ||||||||
4 | Test the battery positive cable between the battery and the starter solenoid for high resistance. Refer to Circuit Testing or Wiring Repairs . Did you find and correct the condition? | Go to Step 8 | Go to Step 5 | ||||||||
5 | Test the ground circuit between the battery and the starter motor for a high resistance. Refer to Circuit Testing or Wiring Repairs . Did you find and correct the condition? | Go to Step 8 | Go to Step 6 | ||||||||
6 | Inspect for poor connections at the starter. Refer to Testing for Intermittent Conditions and Poor Connections or Connector Repairs . Did you find and correct the condition? | Go to Step 8 | Go to Step 7 | ||||||||
7 | Replace the starter. Refer to Starter Motor Replacement . Did you complete the replacement? | Go to Step 8 | -- | ||||||||
8 | Operate the system for which the symptom occurred. Did you correct the condition? | System OK | Go to Step 3 | ||||||||
