The mechanical components of the 6-Speed RWD are as follows:
| • | A torque converter with an electronically controlled capacity clutch (ECCC) |
| • | Vane-type fluid pump assembly |
| • | 1-2-3-4 and 3-5 Reverse clutch assembly |
| • | Input sun gear and carrier assembly |
| • | 4-5-6 clutch assembly with turbine shaft |
| • | 4-5-6 clutch hub assembly |
| • | 1-2-3-4 clutch hub assembly |
| • | 2-6 and 3-5 reverse clutch hub assembly |
| • | Centre support assembly, with 2-6 clutch assembly, and low and Reverse
clutch assembly |
| • | Low clutch sprag assembly |
| • | A double planetary output carrier assembly |
| • | Control valve body assembly |
The electrical components of the 6-Speed RWD are as follows:
| • | Input and output speed sensor assembly |
| • | Manual shift shaft position switch |
| • | Control solenoid valve assembly, which contains the following components: |
| - | Transmission control module (TCM) |
| - | 5 variable bleed line pressure control (PC) solenoids |
| - | Transmission fluid pressure (TFP) switch assembly |
| - | Torque converter clutch (TCC) pressure control solenoid |
For more information, refer to
Electronic Component Description .
