For 1990-2009 cars only
Removal Procedure
- Turn the lumbar support adjuster deflector ring (1) clockwise until it is released from the adjuster shaft.
- Remove the deflector ring (1) and knob assembly (2) by firmly pulling forward.
Installation Procedure
- Install the deflector ring (1) onto the adjustment shaft.
- Twist the lumbar support deflector ring (1) anti-clockwise until it locks into place on the adjustment shaft, listen for an audible click to confirm fitting.
- Install the lumbar support knob assembly (2) by firmly pushing it onto the adjuster shaft.
- Test lumbar support assembly for correct operation.
Notice: Refer to General Repair Instructions in the Preface section.
