GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 VE Sedan 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Crankshaft Balancer Replacement

Tools Required
    • EN 46106 Flywheel Holding Tool.
    • J 45059 Angle Meter.

Removal Procedure
  1. Remove the drive belt. Refer to Drive Belt Replacement .

    2. Caution: Refer to Safety Glasses Caution in the Preface section.

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the starter motor. Refer to Starter Motor Replacement .

    4. Object Number: 1958097 Size: SH
  4. Install the EN 46106  (1) through the starter mounting hole.
  5. Lower the vehicle.
  6. Remove the front air deflector. Refer to Front Air Deflector Replacement .
  7. Remove the crankshaft balancer. Refer to Crankshaft Balancer Removal .

Installation Procedure
  1. Install the crankshaft balancer. Refer to Crankshaft Balancer Installation .
  2. Install the front air deflector. Refer to Front Air Deflector Replacement .
  3. Raise the vehicle.

    4. Object Number: 1958097 Size: SH
  4. Remove EN 46106  (1) from the starter mounting hole.
  5. Remove the starter motor. Refer to Starter Motor Replacement .
  6. Install the drive belt. Refer to Drive Belt Replacement .