Tools Required

KM6067 Radio Removal Tool

1. Remove the navigation module. Refer to Navigation Module Replacement.



2. Remove the navigation module assembly retaining screws (1).
3. Remove the navigation module carrier from the I/P compartment.

1. Install the navigation module carrier into the I/P compartment.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the navigation module assembly retaining screws (1).

Tighten
Tighten the screws to 2  N·m (18 lb in).

3. Install the navigation module. Refer to Navigation Module Replacement.