For 1990-2009 cars only
Removal Procedure
- Open the front and rear doors of the vehicle on the relevant side.
- Use a suitable tool to carefully remove the roof drip moulding, starting from the front of the vehicle, by prying the roof drip moulding retaining clips (1) away from the vehicle.
- Remove the roof drip moulding (2) from the vehicle.
Important: Carefully remove the roof drip moulding, failure to do so will result in damage to the roof drip moulding.
Important: Take care not to damage the paint on the vehicle when prying the roof drip moulding from the vehicle.
Installation Procedure
- Clean the roof drip gutter with a suitable cleaning solution, using a lint free cloth.
- Install the roof drip moulding (1) starting at the rear of the moulding.
- Install the body side roof drip moulding (1) rear datum pin (2) to the vehicle.
- Install the remaining roof drip moulding retaining clips (1) working from the rear to the front of the vehicle.
- Close the front and rear doors of the vehicle on the relevant side.
Important: Make sure that the rear datum pin is secure and in the correct position.
