Dimensions - Body LWB
Location | Description | Length | Width | Height |
|---|---|---|---|---|
1 | Zero Line 19 mm Gage Hole | 0 | 0 | 0 |
A | Door Hinge Attach | 76 mm (2.99 in) | 1687 mm (66.42 in) | 363 mm (14.29 in) |
B | Door Hinge Attach | 155 mm (6.1 in) | 1592 mm (62.68 in) | 452 mm (17.8 in) |
C | Door Hinge Attach | 1186 mm (46.69 in) | 1704 mm (67.09 in) | 757 mm (29.8 in) |
D | Upper Door Lock Striker Attach | 1173 mm (46.18 in) | 1633 mm (64.29 in) | 621 mm (24.45 in) |
E | Door Hinge Attach | 1166 mm (45.91 in) | 1701 mm (66.97 in) | 461 mm (18.15 in) |
F | Upper Door Lock Striker Attach | 2225 mm (87.6 in) | 1640 mm (64.57 in) | 793 mm (31.22 in) |
All dimensions are measured from a zero line, a center line, and a common datum. All dimensions are symmetrical unless otherwise specified. | ||||
Point-to-Point Measurements
Location | Description | Length |
|---|---|---|
A | Lower Top Front Door Hinge Hole to Lower Top Rear Door Hinge Hole | 1103 mm (43.43 in) |
B | Hinge Pillar Datum Hole to Lower Top Rear Door Hinge Hole | 1205 mm (47.44 in) |
C | Hinge Pillar Datum Hole to Lower Bottom Rear Door Hinge Hole | 1170 mm (46.06 in) |
D | Lower Bottom Front Door Hinge Hole to Lower Bottom Rear Door Hinge Hole | 1086 mm (42.76 in) |
E | Lower Top Rear Door Hinge Hole to Upper Rear Door Striker Hole | 1042 mm (41.02 in) |
F | Lower Top Rear Door Hinge Hole to Lower Body Side Datum Hole | 957 mm (37.68 in) |
G | Lower Bottom Front Door Hinge Hole to Lower Body Side Datum Hole | 853 mm (33.58 in) |
H | Lower Body Side Datum Hole to Rear Body Side Datum Hole | 958 mm (37.72 in) |
All dimensions are measured from a zero line, a center line, and a common datum. All dimensions are symmetrical unless otherwise specified. | ||
Dimensions - Underbody
Location | Description | Length | Width | Height |
|---|---|---|---|---|
1 | Zero Line 18 mm Hole | 1535 mm (60.43 in) | 810 mm (31.89 in) | 128 mm (5.04 in) |
A | 20 mm Hole | 1136 mm (44.72 in) | 0 | 0 |
B | 10 mm Bumper Mounting | 805 mm (31.69 in) | 886 mm (34.88 in) | 328 mm (12.91 in) |
C | 16 mm Hole | 2234 mm (87.95 in) | 1024 mm (40.31 in) | 200 mm (7.87 in) |
D | 25.1 mm x 39.7 mm Gage Hole | 3114 mm (122.6 in) | 1048 mm (41.26 in) | 434 mm (17.09 in) |
E | 25.1 mm x 39.7 mm Gage Hole | 3318 mm (130.63 in) | 1048 mm (41.26 in) | 434 mm (17.09 in) |
F | 18 mm Bumper Mounting | 3538 mm (139.29 in) | 0 | 0 |
All dimensions are measured from a zero line, a center line, and a common datum. All dimensions are symmetrical unless otherwise specified. | ||||
Dimensions - Body SWB
Location | Description | Length | Width | Height |
|---|---|---|---|---|
1 | Zero Line 25 mm Gage Hole | 0 | 1660 mm (65.35 in) | 550 mm (21.65 in) |
A | Door Hinge Attach | 76 mm (2.99 in) | 1687 mm (66.42 in) | 363 mm (14.29 in) |
B | Door Hinge Attach | 155 mm (6.1 in) | 1592 mm (62.68 in) | 452 mm (17.8 in) |
C | Door Hinge Attach | 1186 mm (46.69 in) | 1704 mm (67.09 in) | 756 mm (29.76 in) |
D | Door Lock Striker Attach | 1170 mm (46.06 in) | 1633 mm (64.29 in) | 581 mm (22.87 in) |
E | Door Hinge Attach | 1166 mm (45.91 in) | 1702 mm (67.01 in) | 461 mm (18.15 in) |
F | Upper Door Lock Striker Attach | 2131 mm (83.9 in) | 1640 mm (64.57 in) | 795 mm (31.3 in) |
All dimensions are measured from a zero line, a center line, and a common datum. All dimensions are symmetrical unless otherwise specified. | ||||
Point-to-Point Measurements
Location | Description | Length |
|---|---|---|
A | Lower Top Front Door Hinge Hole to Lower Top Rear Door Hinge Hole | 1103 mm (43.43 in) |
B | Hinge Pillar Datum Hole to Lower Top Rear Door Hinge Hole | 1205 mm (47.44 in) |
C | Hinge Pillar Datum Hole to Lower Bottom Rear Door Hinge Hole | 1170 mm (46.06 in) |
D | Lower Bottom Front Door Hinge Hole to Lower Bottom Rear Door Hinge Hole | 1086 mm (42.76 in) |
E | Lower Top Rear Door Hinge Hole to Upper Rear Door Striker Hole | 948 mm (37.32 in) |
F | Lower Top Rear Door Hinge Hole to Lower Body Side Datum Hole | 880 mm (34.65 in) |
G | Lower Bottom Front Door Hinge Hole to Lower Body Side Datum Hole | 763 mm (30.04 in) |
H | Lower Body Side Datum Hole to Rear Body Side Datum Hole | 961 mm (37.83 in) |
All dimensions are symmetrical unless otherwise specified. | ||
Dimensions - Underbody
Location | Description | Length | Width | Height |
|---|---|---|---|---|
1 | Zero Line 18 mm Hole | 1535 mm (60.43 in) | 810 mm (31.89 in) | 128 mm (5.04 in) |
A | 20 mm Hole | 805 mm (31.69 in) | 886 mm (34.88 in) | 328 mm (12.91 in) |
B | 10 mm Bumper Mounting | 1136 mm (44.72 in) | 0 | 0 |
C | 16 mm Hole | 2140 mm (84.25 in) | 1024 mm (40.31 in) | 200 mm (7.87 in) |
D | 25.1 mm x 39.7 mm Gage Hole | 2910 mm (114.57 in) | 1048 mm (41.26 in) | 434 mm (17.09 in) |
E | 25.1 mm x 39.7 mm Gage Hole | 3114 mm (122.60 in) | 1048 mm (41.26 in) | 434 mm (17.09 in) |
F | 18 mm Bumper Mounting | 3335 mm (131.30 in) | 0 | 0 |
All dimensions are measured from a zero line, a center line, and a common datum. All dimensions are symmetrical unless otherwise specified. | ||||
Dimensions - Body Sportwagon
Vehicle Dimensions - Main
Important:: Dimensions are measured from the centre of holes, on the outer side of the metal surface.
Important:: The main datum surface (1) is the underside of each outrigger at the 16.1mm dia datum hole. The main datum surface (1) is parallel with the bottom of each rocker assembly inboard of the pinch weld flange.
Important:: All dimensions are projected to be either parallel with or at 90 degrees to the main datum surface (1).
Important:: The plan view is shown as viewed from beneath the vehicle.
Important:: For location details of measurement points 1 -- 9, refer to Vehicle Dimensions - Measuring Points.
Location | Description | Length |
|---|---|---|
A | Centreline of vehicle to centre of 20.1mm dia datum hole | 444 mm (17.48 in) |
B | Centre of 20.1mm dia datum hole to centre of 16.1mm dia datum hole | 1329 mm (52.31 in) |
C | Centreline of vehicle to centre of 16.1mm datum dia hole | 500 mm (19.69 in) |
D | Centre of 16.1mm dia datum hole to centre of 25.1mm dia datum hole | 2004 mm (78.91 in) |
E | Centreline of vehicle to centre of 25.1mm datum dia hole | 645 mm (25.39 in) |
F | Centreline of vehicle to centre of rear frame mounting hole | 512 mm (20.16 in) |
G | Centre of 25.1mm dia datum hole to centre of 13.1mm dia datum hole | 1820 mm (71.66 in) |
H | Centreline of vehicle to centre of 13.1mm datum dia hole | 524 mm (20.63 in) |
I | Centre of 20.1mm dia datum hole to centre of 10.1mm dia datum hole | 481 mm (18.92 in) |
J | Centre of 20.1mm dia datum hole to centre of 16.1mm dia datum hole | 935 mm (36.81 in) |
K | Centre of 16.1mm dia datum hole to centre of 25.1mm dia datum hole | 1645 mm (64.76 in) |
L | Centre of 25.1mm dia datum hole to centre of 13.1mm dia datum hole | 1395 mm (54.92 in) |
M | Centre of 25.1mm dia datum hole to centre of rear frame mounting hole | 365 mm (14.37 in) |
N | Datum surface 1 to centre of 10.1mm dia datum hole | 693 mm (27.27 in) |
O | Datum surface 1 to centre of 9.9mm dia hole | 661 mm (26.01 in) |
P | Datum surface 1 to centre of 20.1mm dia datum hole | 232 mm (9.14 in) |
Q | Centre of 20.1mm dia datum hole to centre of 25.1mm dia datum hole | 900 mm (35.43 in) |
R | Centre of 25.1mm dia datum hole to centre of 25.1mm dia datum hole | 1895 mm (74.61 in) |
S | Datum surface 1 to centre of 25.1mm dia datum hole | 455 mm (17.93 in) |
T | Datum surface 1 to centre of 16.1mm dia datum hole | 140 mm (5.53 in) |
U | Centre of 25.1mm dia datum hole to centre of 16.1mm dia datum hole | 940 mm (37.01 in) |
V | Centre of 25.1mm dia datum hole to centre of 13.1mm dia datum hole | 524 mm (20.63 in) |
W | Datum surface 1 to centre of 13.1mm dia datum hole | 1165 mm (45.88 in) |
X | Centre of 25.1mm dia datum hole to centre of 20.1mm dia datum hole | 920 mm (36.20 in) |
Y | Datum surface 1 to centre of rear frame mounting hole | 103 mm (4.07 in) |
Z | Datum surface 1 to centre of 8.2mm dia hole | 809 mm (31.83 in) |
AA | Datum surface 1 to centre of 20.1mm dia datum hole | 420 mm (16.54 in) |
AB | Datum surface 1 to centre of 25.1mm dia datum hole | 140 mm (5.52 in) |
AC | Centre of 25.1mm dia datum hole to centre of 8.2mm dia hole | 379 mm (15.65 in) |
AD | Centre of 20.1mm dia datum hole to centre of 16.1mm dia datum hole | 418 mm (16.47 in) |
AE | Datum surface 1 to centre of 13.1mm dia datum hole | 338 mm (13.31 in) |
AF | Datum surface 1 to centre of 16.1mm dia datum hole | 786 mm (30.93 in) |
Vehicle Dimensions - Engine Compartment
Important:: Dimensions are measured from the centre of holes, on the outer side of the metal surface.
Important:: The main datum surface (1) is the underside of each outrigger at the 16.1mm dia datum hole. The main datum surface (1) is parallel with the bottom of each rocker assembly inboard of the pinch weld flange.
Important:: All dimensions are projected to be either parallel with the main datum surface (1). Refer to Vehicle Dimensions - Main.
Important:: The plan view is shown as viewed from above the vehicle.
Important:: For location details of measurement points 1 -- 2, refer to Vehicle Dimensions - Measuring Points.
Location | Description | Length |
|---|---|---|
A | Centre of 10.1mm dia datum hole to centre of 10.1mm dia datum hole | 1574 mm (61.99 in) |
B | Centre of 10.1mm dia datum hole to centre of 9.9mm dia hole | 427 mm (16.82 in) |
C | Centre of 9.9mm dia hole to centre of 9.9mm dia hole | 1511 mm (59.47 in) |
D | Centre of 9.9mm dia hole to centre of 10.1mm dia datum hole | 1600 mm (63.00 in) |
Vehicle Dimensions - Measuring Points
Important: Dimensions are measured from the centre of holes, on the outer side of the metal surface.
