Parameter | Operating Conditions | Expected Value | Definition |
|---|---|---|---|
Ignition is ON, engine OFF, and vehicle is stationary | |||
Antenna | -- | Main | |
Audio Source | CD Mode Selected | CD | This parameter determines which mode the Infotainment is currently using. |
Tuner Mode Selected | Tuner | ||
Audio System | System On | On | This parameter determines if the Audio System is On or Off. |
System Off | Off | ||
Auxiliary Input | External Device Connected | Active | This parameter displays if their is an external device connected to the Infotainment unit. |
External Device Not Connected | Inactive | ||
Balance | Left 1 to 6 | User Dependent | This parameter displays the current balance of the speaker on the left or right sides. |
Right 1 to 6 | User Dependent | ||
Band | FM 1 | FM 1 | This parameter displays the currently selected Band. |
FM 2 | FM 2 | ||
FM ASM | FM ASM | ||
AM | AM | ||
AM ASM | AM ASM | ||
Bass | STD | User Dependent | This parameter displays the current bass setting based off the user's selection. |
+1 to +6 | User Dependent | ||
Battery Voltage | -- | 12 Volts | The scan tool displays 0-14 Volts. The scan tool displays approximately 12 Volts when the ignition is On. |
Beeps | Beeps activated | On | This parameter displays if the audio unit will beep when buttons are pressed. |
Beeps deactivated | Off | ||
Brightness | STD | User Dependent | This parameter displays the currently selected brightness based off the users selection. |
-5 to +5 | User Dependent | ||
CD Error | Problem with Unit | Yes | This parameter displays if there is a current error with the audio unit. |
No Problem with Unit | No | ||
CD Player Status | Pause button pressed while CD paused | Play | This parameter displays the status of the CD Player. |
Pause button pressed while CD playing | Pause | ||
Audio system turned off or change of audio source | Stop | ||
Track up button pressed | Track Up | ||
Track down button pressed | Track Down | ||
Reverse button pressed | Reverse | ||
Cue button pressed | Cue | ||
CD Special Play Mode | Repeat button pressed | Repeat Track | This parameter displays the last CD special play mode that was selected by the user. |
Random button pressed | Random Track | ||
Colour | -- | Vehicle Dependent | This parameter displays a numeric value. This number corresponds to the colour of the infotainment unit display. |
Contrast | STD | User Dependent | This parameter displays the current contract setting, based off the user's selection. |
-5 to +5 | User Dependent | ||
Current CD | -- | Audio CD | This parameter displays the type of disc inserted into the CD Player. |
-- | MP3 | ||
Current CD Type | CDDA | User Dependent | This parameter displays whether the compact disc is CDDA or MP3. |
MP3 | User Dependent | ||
Current Track | 1 to 30 | -- | This parameter displays the current track on the CD been played. |
Date | 1 to 31 | -- | This parameter displays the current date stored in the infotainment unit. |
Day | Monday - Sunday | -- | This parameter displays the current day of the week stored in the unit. |
DDL Bass Attenuation | 0 to 60 dB | User Dependent | This parameter displays the current dynamic distortion bass level. |
DDL Setting | Default Setting | Off | |
User dependent | Cur 1 to Cur 3 | ||
DDL Volume | 0 to 60 dB | 0 dB | This parameter displays the current dynamic distortion volume level. |
Dial Turns | Counts | 1 Counts | This parameter displays the numbers of counts the dial has been turned. |
Dial Type | Mode dial used | Mode | This parameter displays the last dial type to be used by the user. |
Multi-function dial used | Multi-function | ||
Fan speed dial used | Fan Speed | ||
Driver temp dial used | Driver Temp | ||
Display Format | -- | 12 Hour | This parameter displays the time format based on 12 hour or 24 hour format. |
-- | 24 Hour | ||
Display Illumination | 1 to 100 % | User Dependent | This parameter displays the current illumination level based from the user's selection. |
Drive Type | -- | Single CD | This parameter displays the current drive type as selected by the user |
Driver Identification | Programmed Key | Driver 1 | This parameter displays the status of the current ignition key. |
Programmed Key | Driver 2 | ||
Equalizer | On | User Dependent | This parameter displays if the user has turned On or Off the equalizer settings in the audio unit. |
Off | User Dependent | ||
Equalizer Boost | -- | 0 | |
Equalizer Preset | -- | On | This parameter displays the current preset for the equalizer. |
-- | Off | ||
Fader | STD | User Dependent | This parameter displays the current settings for the fader based off the user's selection. |
Front 1 to 6 | User Dependent | ||
Rear 1 to 6 | User Dependent | ||
Fascia Button | Depends on Last button pressed. | -- | This parameter displays the last fascia button pressed during the last ignition cycle. |
Field Intensity | -- | 0-300 dBuV | The scan tool displays 0-300 dBuV. The signal from the antenna is measured in dBuV. |
Frequency | 87.5 to 108.00 FM | User Dependent | This parameter displays the currently selected radio frequency. |
522 to 1710 AM | User Dependent | ||
Hazards | Hazard button pressed | Active | This parameter displays whether the hazard lamps have been activated. |
Hazard button depressed | Inactive | ||
Illumination | -- | 0-100% | |
Illumination Mode | -- | Auto | |
Interior Illumination | -- | 0-100% | This parameter displays the interior illumination as a percentage. The highest percentage will have the interior lamps at their brightest. |
Key Stuck | -- | None | This parameter displays if their is currently a button stuck on the fascia plate. |
Loudness | Loudness activated | On | This parameter displays if the loudness function has be turned On or Off by the user. |
Loudness deactivated | Off | ||
Month | -- | Varies | This parameter displays the current month |
Multipath | -- | % | |
Multipath | -- | Yes | |
-- | No | ||
Mute | Mute button pressed | On | This parameter displays if the audio unit mute button has been activated or deactivated. |
Mute button depressed | Off | ||
Navigation Audio Channel | -- | Varies | This parameter displays the audio channel that is utilised for the navigation audio |
Navigation | -- | Activated | This parameter displays if the navigation is Activated or Not Activated. |
-- | Not Activated | ||
Navigation Volume | -- | dB | This parameter displays the correctly selected volume setting for the navigation system through the audio unit. |
Play Time | -- | hh:mm:ss | This parameter displays the play time of the CDDA/MP3. |
Preset | 1 to 6 | User Dependent | This parameter displays the currently selected preset radio station. |
Rear Aux | Rear aux activated | On | This parameter displays if the rear aux is On or Off |
Rear aux deactivated | Off | ||
Rear Controls | Rear controls activated | Active | This parameter displays if the rear seat controls are working correctly. |
Rear controls deactivated | Inactive | ||
Search Sensitivity | Local | User Dependent | This parameter displays the currently selected search sensitivity signal strength. |
Distant | User Dependent | ||
Auto | User Dependent | ||
Single CD Loaded | CD Loaded into Unit | Yes | The scan tool will display whether their is a compact disc loading or not. |
No CD Laded into Unit | No | ||
Speed Dependent Volume | -- | dB | This parameter displays the volume in dB of the infotainment unit dependent on the speed of the vehicle. |
Speed Volume Curve | Default Setting | Off | This parameter displays the speed volume curve as defined by the user |
User Settings | Cur 1 to Cur 5 | ||
Stereo Status | User dependent | Mono | This parameter displays if the audio system on stereo or mono mode based on the user's selection. |
User dependent | Stereo | ||
System Power Mode | Ignition is in OFF position | Off | This parameter displays the current ignition cycle the key is on. |
Ignition is in ACC position | Accessory | ||
Ignition is in RUN position | Run | ||
Ignition is in CRANK position | Crank | ||
Time | -- | hh:mm:ss | This parameter displays the current time. |
Total Track Time | -- | hh:mm:ss | The scan tool will display the total time of the current song. |
Treble | STD | User dependent | The scan tool will show the current treble setting as selected by the user. |
-6 to +6 | User dependent | ||
Vehicle Speed | -- | km/h | This parameter indicates the vehicle speed calculated by the control module based on an input from the vehicle speed sensor (VSS). The scan tool will display a high value at higher vehicle speeds, and a low value at lower vehicle speeds. |
Voice In | Voice in activated | Active | |
Voice in deactivated | Inactive | ||
Volume | 0 to 40 | User dependent | The scan tool will show the current user selection. |
Year | 2000 to 2099 | -- | The scan tool will show the current year. |
