GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Sportwagon 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Liquefied Petroleum Gas Control Module Bracket Replacement

Removal Procedure

    Caution: Refer to Safety Glasses Caution in the Preface section.

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation.
  3. Remove the left front wheel house liner. Refer to Front Wheelhouse Liner Replacement.
  4. Remove the LPG control module. Refer to Liquefied Petroleum Gas Control Module Replacement.

    5. Object Number: 1963330 Size: SH

    Important: Use a suitable tool to drill out the rivets.

  5. Remove the LPG control module bracket to body retaining rivets (1).
  6. Remove the LPG control module bracket (2) from the vehicle (3).

Installation Procedure

    Object Number: 1963330 Size: SH
  1. Position the LPG control module bracket (2) to the vehicle (3).
  2. Install the LPG control module bracket to body retaining rivets (1).
  3. Install the LPG control module. Refer to Liquefied Petroleum Gas Control Module Replacement.
  4. Install the left front wheel house liner. Refer to Front Wheelhouse Liner Replacement.
  5. Install the left front wheel. Refer to Tire and Wheel Removal and Installation.