GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Epica 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Front Side Door Molding Replacement

Removal Procedure

    Object Number: 1256779 Size: SH
  1. Reposition the weatherstrip in order to access the screws.
  2. Remove the screws and the front door body side molding, shown, rear door rear quarter upper trim panel molding similar.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256779 Size: SH
  1. Install the screws and the front door body side, shown, rear door rear quarter upper trim panel molding similar.

    2. Tighten
    Tighten the front door body side molding screws to 1.3 N·m (12 lb in).

  2. Install the weatherstrip to its original position.