GM Service Manual Online
For 1990-2009 cars only

    Object Number: 749784  Size: SH

    Important: Align each bolt hole in the valve body with the holes in the spacer plate and gasket assembly.

  1. Install the new spacer plate and gasket assembly (324) onto the rear control valve body assembly (326).

  2. Object Number: 749790  Size: SH

    Important: Align each bolt hole in the valve body with the holes in the spacer plate and gasket assembly.

  3. Install the rear control valve body assembly (326) onto the middle control valve body assembly (323).

  4. Object Number: 766671  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install 2 - M5 x 0.8 x 35 mm rear control valve body bolts (335).
  6. Install 1 - M5 x 0.8 x 40 mm rear control valve body bolt (333).

  7. Object Number: 749781  Size: SH
  8. Hand tighten the 3 rear control valve body assembly bolts (333, 335).

  9. Object Number: 749768  Size: SH

    Important: Align each bolt hole on the valve body with the holes in the gaskets and plates.

  10. Install the spacer plate (328) and the 2 new gaskets (327, 329) onto the No. 2 rear control valve body assembly (330).

  11. Object Number: 749791  Size: SH

    Important: Align each bolt hole on the valve body with the holes in the gaskets and plates.

  12. Install the No. 2 rear control valve body assembly (330) onto the rear control valve body assembly (326).

  13. Object Number: 766670  Size: SH
  14. Install 1 - M5 x 0.8 x 76 mm control valve body bolt (331) into the No. 2 rear control valve body assembly.
  15. Install 4 - M5 x 0.8 x 49.5 mm control valve body bolts (332) into the No. 2 rear control valve body assembly.

  16. Object Number: 749766  Size: SH
  17. Hand tighten the 5 control valve body assembly bolts (331, 332).

  18. Object Number: 749764  Size: SH
  19. Turn the valve body assembly over.

  20. Object Number: 749763  Size: SH
  21. Install the M5 x 0.8 x 50 mm control valve body bolt (304) and hand tighten.

  22. Object Number: 749761  Size: SH
  23. Install the 3 fluid strainers (371), 1 fluid strainer (372), and the 2 accumulator check valve assemblies (353) into the middle control valve body assembly.

  24. Object Number: 767263  Size: SH
  25. Install the gasket (320) to the front control valve body assembly (315).
  26. Install the front control valve body spacer plate (321).
  27. Install the gasket (322).

  28. Object Number: 767262  Size: SH

    Important: Align each bolt hole in the valve body with the holes in the gaskets and spacer plate.

  29. Install the spacer plate and gaskets on to the front control valve body assembly (315).
  30. Important: Align each bolt hole in the valve body with the holes in the gaskets and spacer plate.

  31. Install the front control valve body assembly (315) onto the middle control valve body assembly (323).

  32. Object Number: 766667  Size: SH
  33. Install 1 - M5 x 0.8 x 50 mm control valve body bolt (304) into the front control valve body assembly and hand tighten.
  34. Install 4 or 5- M5 x 0.8 x 20 mm control valve body bolts (313) into the front control valve body assembly and hand tighten.
  35. Install 2 - M5 x 0.8 x 16 mm control valve body bolts (314) into the front control valve body assembly and hand tighten.

  36. Object Number: 785207  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  37. Tighten all 16 control valve body assembly bolts, evenly and gradually.
  38. Tighten
    Tighten the control valve body assembly bolts to 7 N·m (62 lb in).


    Object Number: 798651  Size: SH

    Important: 

       • Use NEW O-ring seals.
       • Do not damage the O-ring seals.

  39. Replace the O-ring seals (306) on each of the 5 shift solenoid valves (300, 303, 305, 308, 310).
  40. Install the 5 shift solenoid valves (300, 303, 305, 308, 310).
  41. Install the 5 shift solenoid valve retaining bolts.
  42. • 1 - (301) - M5 x 0.8 x 62 mm
    • 2 - (302) - M5 x 0.8 x 28 mm
    • 2 - (307) - M5 x 0.8 x 10 mm
  43. Tighten the 5 shift solenoid valve retaining bolts (301, 302, 307).
  44. Tighten
    Tighten the shift solenoid valve retaining bolts to 7 N·m (62 lb in).


    Object Number: 749753  Size: SH
  45. Install the line pressure control solenoid valve assembly (316) and the shift pressure control solenoid valve assembly (340).
  46. Install the control valve body solenoid valve retainer (312) and 1 - M5 x 0.8 x 13 mm control valve body bolt (311).
  47. Tighten
    Tighten the control valve body bolt to 7 N·m (62 lb in).


    Object Number: 749751  Size: SH
  48. Install the TCC lock up pressure control solenoid valve assembly (339).
  49. Install the TCC lock up pressure control solenoid valve retainer (319), the wiring harness clip (318), and 1 - M5 x 0.8 x 10 mm control valve body bolt/screw (307).
  50. Tighten
    Tighten the control valve body bolt to 7 N·m (62 lb in).


    Object Number: 749750  Size: SH
  51. Install the manual valve (337) into the middle control valve body assembly.