For 1990-2009 cars only
- Turn the ignition ON.
- Press and hold the rear part of the switch to open the sunroof fully. Release the switch when the sunroof has fully opened.
- Press and hold the front part of the switch to close the sunroof fully.
- Press and hold the switch again toward close until the sunroof clicks and slight movement occurs. This click should occur within ten seconds.
- Confirm the re-calibration procedures by performing sunroof opening and closing operation.
Important: If the sunroof opens slightly and stops, release then push the switch and hold it and repeat these steps until the sunroof opens fully.
Important: Press and hold the front part of the switch until the sunroof does not move.
