GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 Epica 🢒 Preface 🢒 Cautions and Notices 🢒 Ignition Coil Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1375314 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the ignition coil wiring harness connectors.
  3. Remove the ignition coils.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1375315 Size: SH
  1. Install the ignition coils.

    2. Tighten
    Tighten the ignition coil retaining bolts to 7 N·m (62 lb in).

  2. Connect the ignition coil wiring harness connectors.
  3. Connect the negative battery cable.