GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2007 🢒 Epica 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Intake Manifold Tuning Valve Actuator Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1375158 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the throttle cable by opening the throttle and moving the cable through the release slot.

    3. Object Number: 1375352 Size: SH
  3. Disconnect the vacuum hose from the intake manifold tuning (IMT) valve actuator.

    4. Important: Ensure the IMT valve flap is closed before removing the IMT valve.

  4. Remove the IMT actuator and the IMT valve.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1375355 Size: SH
  1. Install the IMT valve and the IMT actuator.

    2. Tighten

        • Tighten the IMT valve retaining bolts to 12 N·m (106 lb in).
        • Tighten the IMT actuator retaining bolts to 12 N·m (106 lb in).
  2. Connect the vacuum hose to the IMT actuator.

    3. Object Number: 1375158 Size: SH
  3. Connect the throttle cable.
  4. Connect the negative battery cable.