GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Captiva 🢒 Suspension 🢒 Tires and Wheels 🢒 Rear Camber Adjustment

    Object Number: 933977 Size: SH
  1. Loosen the upper control arm-to-frame fastener enough to allow movement.

    2. Important: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.

  2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
  3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
  4. Reinspect the rear camber specifications and adjust as necessary.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Hold the nut and tighten the upper control arm-to-frame bolt.

    6. Tighten
    Tighten the bolt to 164 N·m (121 lb ft).

  6. Repeat the procedure for the other rear wheel.