Check other instrumentation lights.

Are those lights also off?

--

Go to Diagnostic Starting Point - Lighting Systems

Go to Step 2

1. Remove the controller.
2. Check the voltage between terminals A4 of the controller connector.

Is the voltage within the specified value?

11-14 V

Go to Step 4

Go to Step 3

Repair the wiring harness between J6 terminal 3 and controller connector terminal A4.

Is the repair complete?

--

System OK

--

Check the illumination lamps.

Is one burned out?

--

Go to Step 5

Go to Step 6

Replace the burned out illumination lamp.

Is the repair complete?

--

System OK

--

Replace the ATC controller.

Is the repair complete?

--

System OK

--