GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Captiva 🢒 Engine 🢒 Engine Cooling 🢒 Transmission Fluid Replacement
  1. Raise and support the vehicle.
  2. Remove the transaxle drain plug and allow the transaxle to drain completely.
  3. Remove the fluid level check plug.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Clean and install the transaxle drain plug.

    5. Tighten
    Tighten the transaxle drain plug to 6 N·m (53 lb in) plus an additional 45-180 degrees.

  5. Add SAE75W90 transaxle fluid until it seeps out of the fluid level check plug.
  6. Clean and install the fluid level check plug.

    7. Tighten
    Tighten the fluid level check plug to 6 N·m (53 lb in) plus an additional 45-180 degrees.

  7. Lower the vehicle and verify proper operation.

Fluid Specification

SAE75W90

Fluid Capacity

FWD

2.1L (2.22 qt)