Important: Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
Visual/Physical Inspection
| • | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
| • | Inspect the battery for correct installation and physical damage. |
| • | Test the condition of the battery. Terminal voltage should be 11.5-13.5 volts. |
| • | Inspect the wiring for damage. Inspect the connections to the starter motor, the starter solenoid, the ignition switch, the battery and all related ground points. |
| • | If the battery, wiring and switches are in satisfactory condition and the engine is known to be functioning properly, remove and test the starter motor. |
| • | When the charging system is operating normally, the charge indicator lamp will come ON when the ignition switch is turned ON and will go out when the engine starts. |
| • | Inspect the generator for loose or improper mounting and the generator drive belt for correct installation. |
| • | Inspect the drive belt for correct installation. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
