GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Barina 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Hose Replacement

Removal Procedure

    Object Number: 1723055 Size: SH
  1. Open the hood.
  2. Disconnect the windshield washer hose from the washer nozzles on the hood.
  3. Remove the front left wheel. Refer to Tire and Wheel Removal and Installation.

    4. Object Number: 1719817 Size: SH
  4. Remove the bolts and the front wheel well splash shield.
  5. Disconnect the washer hose from the washer reservoir.

Installation Procedure

    Object Number: 1723055 Size: SH
  1. Route the washer hose to the washer reservoir.
  2. Connect the washer hose to the washer reservoir.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1719817 Size: SH
  3. Install the front wheel well splash shield with the bolts.

    4. Tighten
    Tighten the front wheel well splash shield bolts to 1.5 N·m (13 lb in).

  4. Install the front left wheel. Refer to Tire and Wheel Removal and Installation.
  5. Connect the windshield washer hose to the washer nozzles on the hood.
  6. Close the hood.