GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Barina 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Sunroof Module Assembly Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1248299 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the headliner. Refer to Headlining Trim Panel Replacement.
  3. Remove the drain hoses.
  4. Remove the strap.
  5. Disconnect the electrical connector.
  6. Remove the bolts and the motor.

    7. Object Number: 1248300 Size: SH
  7. Disconnect the electrical connector.
  8. Remove the strap.
  9. Remove the motor control module.

    10. Object Number: 1248301 Size: SH
  10. Remove the bolts and the sunroof housing from the vehicle.

    11. Object Number: 1248303 Size: SH
  11. Remove the drain channel.
  12. Remove the sunshade.

Installation Procedure

    Object Number: 1248303 Size: SH
  1. Install the sunshade.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1248301 Size: SH
  2. Install the sunroof housing and tighten to 7 N·m (62 lb in)..

    3. Object Number: 1248300 Size: SH
  3. Install the motor control module.
  4. Manually position the sunroof glass in the fully closed position.

    5. Object Number: 1248299 Size: SH

    Note: The sunroof motor assembly must be in the fully closed position before installation.

  5. Install the motor and tighten to 5 N·m (44 lb in).
  6. Install the drain hoses.
  7. Install the headliner. Refer to Headlining Trim Panel Replacement.
  8. Connect the negative battery cable.