GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Barina 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Transmission Control Module Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the negative battery cable.

    2. Object Number: 1245836 Size: SH
  2. Locate the transmission control module (TCM) electrical connector next to the brake pedal assembly.
  3. Disconnect the TCM electrical connector.

    4. Object Number: 1245837 Size: SH
  4. Remove the TCM retaining bolts.
  5. Remove the TCM.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1245837 Size: SH
  1. Install the TCM.
  2. Install the TCM bolts and tighten to 5 N·m (44 lb in).

    3. Object Number: 1245836 Size: SH
  3. Connect the TCM electrical connector.
  4. Connect the negative battery cable.
  5. Refer to Control Module References for programming and setup information.