GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Barina 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Exhaust Gas Recirculation Valve Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1343726 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the electrical exhaust gas recirculation (EGR) valve electrical connector.
  3. Remove the EGR valve retaining bolts.
  4. Remove the EGR valve.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1343726 Size: SH
  1. Install the EGR valve with the bolts.

    2. Tighten
    Tighten the electrical EGR valve retaining bolts to 30 N·m (22 lb ft).

  2. Connect the EGR valve electrical connector.
  3. Connect the negative battery cable.