GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2009 🢒 Barina 🢒 Engine 🢒 Engine Cooling 🢒 Drive Belt Replacement

Removal Procedure
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement
  2. Lift the vehicle up.
  3. Remove the front-right tire and wheel.

    4. Object Number: 2033777 Size: SH
  4. Remove the engine under cover.
  5. Remove the power steering pump bracket retaining bolts and loosen the belt.
  6. Remove the power steering pump-air compressor belt.

    7. Object Number: 2033778 Size: SH
  7. Rotate the inner hex of the tensioner nut counterclockwise and loosen the nut.
  8. Rotate the outer hex of the tensioner nut clockwise and put down the tensioner.
  9. Remove the water pump-generator belt.

    10. Object Number: 2033779 Size: SH
  10. Remove the generator. Refer to Generator Replacement.
  11. Remove the accessory tensioner (2).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2033779 Size: SH
  1. Install the accessory tensioner (2).

    2. Tighten
    Tighten the accessory tensioner retaining bolts (1) to 33 N·m (24.3 lb ft).

  2. Install the generator. Refer to Generator Replacement.

    3. Object Number: 2033778 Size: SH
  3. Rotate the outer hex of the tensioner nut counterclockwise and put up the tensioner.
  4. Rotate the inner hex of the tensioner nut clockwise and tighten the nut, installing the water pump-generator belt.

    5. Object Number: 2033780 Size: SH
  5. Install the power steering pump-air compressor belt (1), tightening power steering pump bracket retaining bolts.

    6. Tighten
    Tighten the power steering pump bracket mounting bolts to 20 N·m (14.7 lb ft).

  6. Install the engine undercover.
  7. Lower the vehicle.
  8. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.