GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2006 🢒 Unit Repair 🢒 Engine 🢒 Engine Mechanical - 3.6L 🢒 Engine Mount Strut Bracket Replacement - Left Side

Removal Procedure
  1. Remove the left engine mount strut from the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left Side .
  2. Disconnect the positive crankcase ventilation (PCV) tube from the air intake duct.

    3. Object Number: 1395470 Size: SH
  3. Remove the exhaust crossover pipe nuts (5) and studs (1).

    4. Object Number: 1457530 Size: SH
  4. Disconnect the engine mount strut bracket bolts from the cylinder head.
  5. Remove the left engine mount strut bracket and bolts from the vehicle.

Installation Procedure
  1. Install the left engine mount strut bracket and bolts to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1457530 Size: SH
  2. Connect the engine mount strut bracket bolts to the cylinder head.

    3. Tighten
    Tighten the engine mount strut bracket bolts to 50 N·m (37 lb ft).


    Object Number: 1395470 Size: SH
  3. Install the exhaust crossover pipe nuts (5) and studs (1).

    4. Tighten
    Tighten the exhaust crossover pipe nuts (5) to 34 N·m (25 lb ft).

  4. Connect the PCV tube to the air intake duct.
  5. Install the left engine mount strut to the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left Side .