GM Service Manual Online
For 1990-2009 cars only

High Voltage Circuit Impact Detection Sensor Replacement HP2


Object Number: 1975834  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Turn the ignition switch to the off/lock position, remove the ignition key and secure in technicians pocket until procedure is complete.
  2. Remove the engine protection shield. Refer to Engine Shield Replacement .

1

High Voltage Circuit Impact Detection Sensor

Notice: Refer to Fastener Notice in the Preface section.

Procedure

  1. Disconnect the electrical connection.
  2. Loosen the sensor bolt.

Tip
The bolt is an integral part of the sensor and should remain with the sensor.

Tighten
10 N·m (89 lb in)