GM Service Manual Online
For 1990-2009 cars only

Engine Coolant Air Bleed Pipe Replacement RPOs LY2/LY6

Removal Procedure


    Object Number: 1699347  Size: SH
  1. If replacing the rear coolant air bleed covers, remove the intake manifold. Refer to Intake Manifold Replacement . Otherwise proceed to the next step.
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Drain the cooling system. Refer to Cooling System Draining and Filling .
  4. Reposition the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
  5. Remove the radiator vent inlet hose (2) from the coolant air bleed pipe fitting.

  6. Object Number: 1403313  Size: SH
  7. Remove the coolant air bleed pipe bolts (309) (intake manifold shown removed for clarity).
  8. Remove the coolant air bleed pipe (307) and seals (308).

  9. Object Number: 1403314  Size: SH
  10. Remove the coolant air bleed cover bolts (312), if required.
  11. Remove the coolant air bleed covers (313) and seals (308), if required.

  12. Object Number: 1552485  Size: SH
  13. Remove the seals (308) from the coolant air bleed pipe and/or covers.
  14. Discard the seals.

Installation Procedure


    Object Number: 1552485  Size: SH

    Important: Position the O-ring seal (308) onto the nipple portion of the pipe.

  1. Install the seals onto the coolant air bleed pipe and/or covers.

  2. Object Number: 1403313  Size: SH
  3. Install the coolant air bleed pipe (307) and seals (308) onto the cylinder heads.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the coolant air bleed pipe bolts (309).
  6. Tighten
    Tighten the bolts to 12 N·m (106 lb in).


    Object Number: 1403314  Size: SH
  7. Install the coolant air bleed covers (313) and seals (308), if required.
  8. Install the coolant air bleed cover bolts (312), if required.
  9. Tighten
    Tighten the bolts to 12 N·m (106 lb in).


    Object Number: 1699347  Size: SH
  10. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting.
  11. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
  12. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  13. Fill the cooling system. Refer to Cooling System Draining and Filling .
  14. If the rear coolant air bleed covers were replaced, install the intake manifold. Refer to Intake Manifold Replacement .

Engine Coolant Air Bleed Pipe Replacement RPOs LC9/LY5/LMG/L76/L92/LFA

Removal Procedure


    Object Number: 1699347  Size: SH
  1. If replacing the rear coolant air bleed covers, remove the intake manifold. Refer to Intake Manifold Replacement . Otherwise proceed to the next step.
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Drain the cooling system. Refer to Cooling System Draining and Filling .
  4. Reposition the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
  5. Remove the radiator vent inlet hose (2) from the coolant air bleed pipe fitting.

  6. Object Number: 1401993  Size: SH
  7. Remove the coolant air bleed pipe bolts (309) (intake manifold shown removed for clarity).
  8. Remove the coolant air bleed pipe (307) and seals (308).

  9. Object Number: 1402001  Size: SH
  10. Remove the coolant air bleed cover bolts (312), if required.
  11. Remove the coolant air bleed covers (313) and seals (308), if required.

  12. Object Number: 1552485  Size: SH
  13. Remove the seals (308) from the coolant air bleed pipe and/or covers.
  14. Discard the seals.

Installation Procedure


    Object Number: 1552485  Size: SH

    Important: Position the O-ring seal (308) onto the nipple portion of the pipe.

  1. Install the seals onto the coolant air bleed pipe and/or covers.

  2. Object Number: 1401993  Size: SH
  3. Install the coolant air bleed pipe (307) and seals (308) onto the cylinder heads.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the coolant air bleed pipe bolts (309).
  6. Tighten
    Tighten the bolts to 12 N·m (106 lb in).


    Object Number: 1402001  Size: SH
  7. Install the coolant air bleed covers (313) and seals (308), if required.
  8. Install the coolant air bleed cover bolts (312), if required.
  9. Tighten
    Tighten the bolts to 12 N·m (106 lb in).


    Object Number: 1699347  Size: SH
  10. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting.
  11. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
  12. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  13. Fill the cooling system. Refer to Cooling System Draining and Filling .
  14. If the rear coolant air bleed covers were replaced, install the intake manifold. Refer to Intake Manifold Replacement .