Tools Required

1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement.
2. Install the J 46406 to the fan clutch.



3. Remove the fan hub nut from the water pump in a counterclockwise rotation.



4. Remove the fan clutch bolts from the rear of the fan blade.
5. Separate the fan clutch from the fan blade.

1. Install the fan clutch bolts from the rear of the fan blade.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fan clutch bolts.

Tighten
Tighten the bolts to 23 N·m (17 lb ft).




3. Install the fan assembly.



4. Install the J 46406 to the fan clutch.

Tighten
Tighten the nut clockwise to 56 N·m (41 lb ft).

5. Install the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement.