GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2000 🢒 Yukon - 4WD 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Window Channel Replacement

Removal Procedure
  1. Remove the window. Refer to Front Side Door Window Replacement .
  2. Remove the window glass weatherstrip. Refer to Front Side Door Window Weatherstrip Replacement .

    3. Object Number: 370114 Size: SH
  3. Remove the window run channel bolts.
  4. Remove the front and the rear window run channels from the door.

Installation Procedure

    Object Number: 370114 Size: SH
  1. Install the front and the rear window run channels to the door.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front and the rear window run channel bolts.

    3. Tighten

    1. Tighten the front bolt to 9 N·m (80 lb in).
    2. Tighten the rear bolt to 9 N·m (80 lb in).
  3. Install the window glass weatherstrip. Refer to Front Side Door Window Weatherstrip Replacement .
  4. Install the window. Refer to Front Side Door Window Replacement .