1

Front Fender Emblem Nameplate

Procedure

1. Use a J 25070 or equivalent to remove the old emblem/nameplate.
2. When removing protective liners from adhesive backed emblem/nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Clean all the adhesive residue from the fender using a 50/50 solution by volume of isopropyl alcohol and clean drinkable water.
4. Wipe the surface dry with a clean lint-free towel prior to installing new emblem/nameplate.
5. Apply palm pressure to the emblem/nameplate to ensure full adhesion is made to the fender.

Special Tools

J 25070 Heat Gun 500-700°F