Stabilizer Shaft Link Replacement 35 Series

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the stabilizer shaft link nut (5) from the frame (1).
3. Remove the stabilizer link nut from the stabilizer shaft (4).

Notice: Refer to Fastener Notice in the Preface section.




1. Install the stabilizer shaft link to the frame (1) and to the stabilizer shaft and install the retaining nuts (5).

Tighten

•	Tighten the stabilizer shaft link bolt to the frame (1) to 95 N·m (70 lb ft).

•	Tighten the stabilizer shaft link to the stabilizer shaft to 145 N·m (107 lb ft).

2. Lower the vehicle.

Stabilizer Shaft Link Replacement 15 Series

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the stabilizer shaft link nut and bolt from the frame bracket.
3. Remove the stabilizer shaft link nut from the ball stud.
4. Remove the stabilizer shaft link.

1. Install the stabilizer shaft link.

Important: When tightening the lower link nut verify that the inner jam nut bottoms out on the ball stud.




2. Install the stabilizer shaft link nut to the ball stud.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the stabilizer shaft link nut and bolt to the frame bracket.

Tighten

1. Tighten the link to frame bracket nut to 65 N·m (48 lb ft).
2. Tighten the ball stud to stabilizer shaft nut to 65 N·m (48 lb ft).
3. Tighten the stabilizer shaft link to the stabilizer shaft to 145 N·m (107 lb ft).
4. Lower the vehicle.