GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2006 🢒 Yukon XL - 4WD 🢒 Accessories 🢒 Adjustable Pedals 🢒 Accelerator Pedal Assembly Replacement

Removal Procedure

    Important: Ensure that the brake pedal assembly is adjusted to its lowest position farthest from the drivers seat prior to removal of the accelerator assembly. Failure to do so could result in incorrect step-over height between the brake and accelerator pedals and improper function of the adjustable pedal system.

  1. Disconnect the adjustable pedals motor electrical connector.
  2. Remove the locking clip and disconnect the accelerator sensor connector.
  3. Remove the accelerator assembly . Refer to Accelerator Pedal Position Sensor Replacement.

Installation Procedure
  1. Install the accelerator assembly. Refer to Accelerator Pedal Position Sensor Replacement.
  2. Connect the accelerator sensor connector and install the locking clip.
  3. Connect the adjustable pedals motor electrical connector.
  4. Verify the operation of the adjustable pedals.
  5. Confirm that the accelerator sensor connector locking clip is installed properly.
  6. Verify the operation of the accelerator pedal. Refer to Accelerator Pedal Position Sensor Replacement.