Front Axle Vent Hose Connector Replacement 9.25 Inch Axle

1. Raise the vehicle. Refer Lifting and Jacking the Vehicle .



2. Disconnect the vent hose from the vent hose connector.



3. Remove the vent hose connector from the differential carrier assembly.

1. Install the vent hose connector into the differential carrier assembly.

Apply a small amount of sealer GM P/N 12346004 (Canadian P/N 10953480) or equivalent onto the threads.

Notice: Refer to Fastener Notice in the Preface section.

2. Tighten the vent hose connector.

Tighten
Tighten the vent hose connector to 28 N·m (21 lb ft).




3. Connect the vent hose to the vent hose connector.
4. Lower the vehicle.