GM Service Manual Online
For 1990-2009 cars only

Rattle In Floor Console Cupholder Door (Add Felt Washer)

Subject:Rattle in Floor Console Cupholder Door (Add Felt Washer)

Models:2003 Cadillac Escalade, Escalade EXT
2003 GMC Sierra Denali, Yukon Denali, Yukon XL Denali
with Luxury Package (RPO Y91) and Custom Front Floor Compartment (RPO D07)



Condition

Some customers may comment on a rattle or squeak noise coming from the front floor console area.

Cause

The lower bezel of the front floor console cupholder door may have too much lateral movement, causing an intermittent rattle noise.

Correction


Object Number: 1177238  Size: SH

Add a new 1 mm (0.04 in) felt washer to the passenger side pivot point of the cupholder door (1). There will be two felt washers after the addition of this washer. This should aid in reducing the rattle noise. Use the following procedure and the part number below.

  1. Remove the IP cluster bezel. Refer to the Bezel Replacement - Instrument Panel (I/P) Cluster Replacement procedure in the Instrument Panel, Gauges and Console sub-section of the Service Information (SI).
  2. Remove the floor console upper bezel. Detach the harness connector. Refer to the Bezel Replacement - Floor Console Luxury Upper Replacement procedure in the Instrument Panel, Gauges and Console sub-section of the Service Information (SI).
  3. Remove the floor console lower bezel. Detach the harness connector.
  4. Remove the nut, the metal washer and the plastic washer from the pivot point of the passenger side cupholder door.

  5. Object Number: 1177246  Size: SH
  6. Install a new felt washer, P/N 15197151, over the existing felt washer at the pivot point area shown. Ensure that the washer is centered so that the door does not bind.
  7. Install the plastic washer, the metal washer and the nut on the pivot point of the cupholder door.
  8. Attach the harness connector at the console lower bezel and install the bezel.
  9. Attach the harness connector at the console upper bezel and install the bezel. Refer to the Bezel Replacement - Floor Console Luxury Upper Replacement procedure in the Instrument Panel, Gauges and Console sub-section of the Service Information (SI).
  10. Install the IP cluster bezel. Refer to the Bezel Replacement - Instrument Panel (I/P) Cluster Replacement procedure in the Instrument Panel, Gauges and Console sub-section of the Service Information (SI).
  11. Reset the clock.

Parts Information

Part Number

Description

Qty

15197151

Washer-F/Flr Cnsl (Felt)

1

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time

C2085

Cupholder, Instrument Panel - R or Replace

0.2 hr