GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Yukon XL - 4WD 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Access Door Trim Panel Replacement

Removal Procedure
  1. Remove the door handle bezel. Refer to Door Handle Bezel Replacement .

    2. Object Number: 370139 Size: SH
  2. Remove the trim panel armrest retaining screws.

    3. Object Number: 370137 Size: SH
  3. Insert a flat-bladed tool between the trim panel and the door in order to carefully pry the panel from the door.

Installation Procedure

    Object Number: 370137 Size: SH
  1. Install the trim panel to the door by pushing on the panel edges until the panel is in place.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 370139 Size: SH
  2. Install the trim panel armrest retaining screws.

    3. Tighten
    Tighten the trim panel armrest screws to 2 N·m (18 lb in).

  3. Install the door handle bezel. Refer to Door Handle Bezel Replacement .