Cupholder Replacement Non-Console

1. Tilt the cupholder down.
2. Remove the screws holding the cupholder to the instrument panel (IP).
3. Remove the cupholder from the vehicle.

1. Position the cupholder to the IP.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the screws holding the cupholder to the IP.

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Return the cupholder to the up position.