GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Yukon XL - 4WD 🢒 Driveline/Axle 🢒 Transfer Case - NVG 236/246-NP8 (Two Speed Automatic) 🢒 Memory Seat Control Module Replacement

Removal Procedure
  1. Remove the seat trim panel. Refer to Front Seat Trim Panel Replacement .
  2. Remove the seat cushion. Refer to Front Seat Cushion Frame Replacement .

    3. Object Number: 378544 Size: SH
  3. Disconnect the harness connectors (2).
  4. Remove the memory module retaining screws (1).

    5. Object Number: 381489 Size: SH
  5. Slide the module out.
  6. Remove the module from the vehicle.

Installation Procedure

    Object Number: 381489 Size: SH
  1. Slide the module in until seated.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 378544 Size: SH
  2. Install the memory module retaining screws (1).

    3. Tighten
    Tighten the screws to 3 N·m (26 lb in).

  3. Connect the harness connectors (2).
  4. Install the seat cushion. Refer to Front Seat Cushion Frame Replacement .
  5. Install the seat trim panel. Refer to Front Seat Trim Panel Replacement .
  6. If you installed a new memory seat, calibrate the seat. Refer to Memory Seat Calibration .