GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Yukon XL - 4WD 🢒 Engine 🢒 Engine Electrical 🢒 Instrument Cluster Replacement

Removal Procedure
  1. Remove the instrument panel (IP) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

    2. Object Number: 348794 Size: SH
  2. Remove the screws that retain the IP cluster to the IP assembly.

    3. Object Number: 348734 Size: SH
  3. Remove the IP cluster from the vehicle by tilting the bottom of the cluster outward.
  4. Disconnect the IP cluster harness from the IP cluster.

Installation Procedure

    Object Number: 348734 Size: SH
  1. Connect the IP cluster harness to the IP cluster.

    2. Object Number: 348794 Size: SH
  2. Install the IP cluster onto the IP with the screws. Tilt the top of the cluster into the retainer first to avoid damaging the flexible circuit connections.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws that retain the IP cluster to the IP assembly.

    4. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  4. Install the IP cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .