GM Service Manual Online
For 1990-2009 cars only

Engine Coolant Thermostat Housing Replacement 4.8L, 5.3L, and 6.0L Engines

Removal Procedure

Important: The thermostat is not serviceable separately. The water pump inlet and thermostat must be replaced as an assembly.


    Object Number: 370076  Size: SH
  1. Remove the radiator outlet hose. Refer to Radiator Outlet Hose Replacement .
  2. Remove the water pump inlet bolts.
  3. Remove the water pump inlet and thermostat from the water pump.

Installation Procedure


    Object Number: 370076  Size: SH
  1. Install the thermostat and water pump inlet to the water pump.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the water pump inlet bolts.
  4. Tighten
    Tighten the water pump inlet bolts to 15 N·m (11 lb ft).

  5. Install the radiator outlet hose. Refer to Radiator Outlet Hose Replacement .